Chevrolet Bolt EUV Rear Dash Camera Installation Guide

Installing a rear dash camera on your Chevrolet Bolt EUV can significantly enhance your driving safety by providing crucial video evidence in case of incidents. This guide, inspired by the expertise of Safe Drive Solutions - Dash Cam Specialists, walks you through an efficient and safe way to route the rear camera cable and secure your installation without damaging your vehicle’s wiring.

Getting Started: Understanding the Challenge

The back end of the Chevrolet Bolt EUV presents a common challenge when installing a rear dash camera: running the camera cable neatly and safely into the hatch area. Many people wonder how to pull the cable through without causing damage or running into complicated procedures.

While there are specialty tools designed to simplify this task, they are not strictly necessary. A simple tie strap can often do the job effectively. However, it’s important to avoid makeshift tools like coat hangers, which can be pokey and pointy, posing a risk of damaging the many wires running through the boot. Damaging these wires can lead to costly repairs and installation headaches.

Step-by-Step Wire Routing

Using the Right Tools

The ideal way to pull the rear camera cable through the hatch area is by using a looped tool, such as the Vim Tools Meg 20 or Meg 22. Although Safe Drive Solutions does not sell this tool, it’s a professional-grade option widely recommended for this kind of job.

With the tool threaded through both sides of the hatch area, gently massage and maneuver it to loosen any tight spots. In this case, the hatch was loose enough to allow easy passage of the tool.

Pulling the Cable Through

Next, thread the rear camera wire through the loop at the end of the tool. Slowly and carefully pull the tool back through the hatch area, bringing the wire along with it.

This method ensures the cable is routed cleanly without any snags or damage. Once the wire is through, pull the remaining length and prepare for securing the cable.

Securing and Protecting the Installation

Clipping and Sealing

After pulling the wire through, clip the hatch panel back into place. It’s crucial to ensure the panel is sealed properly to maintain the vehicle’s watertight integrity, preventing moisture from entering the hatch area.

Tie Strapping the Excess Wire

With the cable routed, use tie straps to secure any excess wire. This keeps the wire neat, prevents it from moving around, and protects it from potential pinch points or damage during vehicle use.

Avoiding Pinch Points

Be mindful of the mounting points for the hatch panel clips when securing the wire. Avoid placing the cable in front of these clips or in areas where the panel back side will pinch the wire. Incorrect placement could lead to damage or malfunction of the rear camera wiring once the panel is reinstalled.

Finalizing the Rear Camera Installation

Once the hatch panel is reinstalled and the wiring is secured, the rear camera can be mounted. Remove any protective stickies, clean the mounting surface thoroughly, and affix the camera securely to ensure it stays in place during vehicle operation.

And there you have it — a clean, professional rear dash camera installation on a Chevrolet Bolt EUV that protects your vehicle’s wiring and provides reliable video coverage.

Why Professional Installation Matters

While this guide shows a straightforward method to install a rear dash camera, professional installation can save you time, prevent costly mistakes, and ensure your dash cam functions at its best. Safe Drive Solutions offers expert dash cam installation services across Vancouver, Toronto, and beyond. Learn more about why professional installation is a smart choice in our Get Your Dash Cam Professionally Installed blog.

Explore More Dash Cam Solutions

Interested in upgrading your dash cam system? Safe Drive Solutions provides a wide range of high-quality dash cams suitable for your Chevrolet Bolt EUV and other vehicles:

• Viofo A229 Pro 4K Front and Rear Dash Cam - Exceptional 4K front and 2K rear recording quality.
• Thinkware U3000 Front and Rear Dash Cam - Advanced safety alerts and GPS tracking.
• Vueroid D21 4K Dash Cam - Sony STARVIS 2 image sensor with crystal-clear video quality.

For additional tips on dash cam installation in electric vehicles like the Chevrolet Bolt EUV, visit our Electric Vehicle Dash Cam Installation resource.

Conclusion

Installing a rear dash camera on your Chevrolet Bolt EUV doesn’t have to be complicated or risky. By using the right tools and techniques, you can route the camera cable safely, secure it properly, and enjoy the peace of mind that comes with added visibility and security on the road.

For professional dash cam products and installation services tailored to your vehicle, visit Safe Drive Solutions — your trusted dash cam specialists.