Ford Bronco Sport Front and Rear Dash Cam Installation

A front and rear dash cam in a Ford Bronco Sport needs more than a tidy cable run. The front camera should stay out of the driver’s sightline, and the rear camera needs a mounting spot that works with the Bronco Sport’s separately opening rear glass. Here’s how we handled both.

Keep the front camera out of the driver’s view

We mounted the front dash cam beside the rear-view mirror, off to the passenger side rather than directly in front of the driver. From behind the wheel, the camera sits out of the way and does not block the view through the windshield.

Access power from the passenger footwell

The Bronco Sport’s fuse box is in the passenger-side footwell, behind an access panel. If you’re doing the installation yourself, fuse taps are an option for connecting the camera there.

For this installation, we hardwired the camera instead, so there are no fuse taps in the fuse box. The important distinction is the connection method: the fuse box gives you an accessible location, but you should use a power connection you have properly identified for the vehicle and camera.

Open fuse box in the passenger-side footwell with fuses, connectors and wiring visible

Mount the rear camera without attaching it to the glass

The rear glass can pop open independently of the hatch. That makes it a poor place for the rear dash cam: the camera and its wiring would have to accommodate that separate movement.

Our solution was a small money clip. We bent it to fit, attached it to the rear camera, and used it to mount the camera beneath the upper hatch trim. The camera still points out the back, but it is not fixed to the opening glass. Better yet, the clip holds it in place without modifying the panel.

Rear dash camera held beneath the upper hatch trim by a small metal clip
A bent money clip provides a simple mount without cutting or drilling the hatch panel.

With the hatch open, the rear camera wiring is tucked away and routed through the factory grommets. The finished setup keeps the front camera clear of the driver’s view and gives the rear camera a stable position that does not interfere with the pop-open glass.

Factory rubber wiring grommet along the open rear hatch

Back to blog