Audi Q5 Dash Cam Wiring Behind the Rearview Mirror
A clean dash cam installation in a new Audi Q5 starts at the rearview mirror. The ideal mounting position is directly behind the mirror, where the camera stays discreet while maintaining a clear forward view through the windscreen.
Use the Factory Mirror Area for a Clean Installation
The rearview mirror assembly provides a practical location for routing the dash cam cable. Behind the mirror, the factory trim and existing wiring create a concealed path that keeps the installation tidy rather than leaving a wire exposed across the glass.
With the mirror-area trim opened, the factory wiring is visible above the rearview mirror. This is the area to follow when routing the dash cam lead.
Find the Small Cable Notch
Look closely at the trim near the rearview mirror and you will find a small notch designed to give the cable a path out of the enclosed area. Run the dash cam wire through this notch, then secure it neatly alongside the factory harness.
This small detail makes a big difference. It prevents the wire from being pinched by the trim and avoids an untidy cable run around the mirror mount.
Bring the Cable Directly to the Dash Cam
Once the cable has been routed through the notch and tied in with the factory wiring, it can exit directly at the dash cam mounting location behind the mirror. The result is a compact, discreet setup with only a short length of cable visible at the camera.
The Finished Look
Mounting the dash cam behind the rearview mirror and routing its wire through the factory notch gives the Audi Q5 installation a clean, near-factory appearance. The camera is positioned where it belongs, and the wiring stays hidden around the mirror assembly instead of becoming a distraction inside the cabin.
